#module-9EmZfOLyUqu2c{padding-top:0vw;padding-bottom:0vw;}

Powder filling machines are mainly used for quantitative packaging of powdery, powdery, powdery materials in the chemical industry, food, agricultural and sideline products and other manufacturing industries; such as: milk powder, starch, pharmaceuticals, veterinary drugs, premixes, additives, seasonings Materials, feeds, enzyme preparations, etc.; this system's automatic quantitative packaging machine is suitable for quantitative packaging of powders of various packaging materials such as bags, cans, bottles, etc.; this powder filling machine integrates machinery, electricity, light, and instrumentation. , single-chip microcomputer design and operation, with functions such as system automatic quantification, system automatic filling, and system automatic adjustment of measurement errors; relatively fast: using spiral blanking and light control technology; high precision: using stepper motors and electronic weighing technology


1. Turn off the powder filling machine, open the lower protective cover, and turn the stop plates on the upper ends of the heating block and refrigeration block springs toward A. Pass in direction A1, raise each component, and remove the guide belt.
2. Push the driven wheel in direction B and remove the old heating tube.
3. Install the new heating pipe and install the upper and lower guide belts.
4. The moving wheel, heating block, and refrigeration block rotate back to their original positions.
5. Connect the power supply to rotate the pulley and drive the test machine. If there is a phenomenon that the sealing bag is moving around, the adjustment screw on the passive wheel base can be used to adjust the following.
6. Install the protective cover and continue working after heating.

#unit-6pbs5dv16Da4UJw .ce-image_inner{justify-content:center;}#unit-6pbs5dv16Da4UJw .ce-image{height:100%;width:100%;--image-effect:3;object-fit:cover;}#unit-6pbs5dv16Da4UJw{padding-top:1vw;}

#module-9EmZfOLyUqu2c{padding-top:0vw;padding-bottom:0vw;}

The oral liquid filling machine is mainly used for filling small doses of tincture water, syrup, etc. in pharmaceutical factories. It is one of the main components of the oral liquid washing, drying, filling and rolling unit. It can be connected online or used as a stand-alone machine. The oral liquid filling machine mainly has the following operating principles and components.


(1) Transmission principle: The motor transmits the power to the reducer worm gear shaft through the pulley, and then the worm gear shaft passes through each gear to transmit the power to the dial shaft, filling part and capping head. The filling part, capping head and each dial wheel move synchronously, and the power is transmitted to the bottle feeding dial equipment through the bevel gear.
(2) Principle of the filling part: Oral liquid bottles are sent from the bottle feeding wheel to the transition wheel, and then sent to the synchronous belt by the transition wheel. The insert on the synchronous belt drags the bottle forward at a constant speed, and the filling Under the control of the tracking mechanism, the needle is inserted into the mouth of the bottle and moves forward synchronously with the bottle to achieve tracking filling. The submersible needle rises as the liquid level rises, playing a defoaming role.
(3) Cap supply system: It consists of cap feeding track, cap management head and cap wearing mechanism. The cap sorting head adopts the principle of electromagnetic spiral oscillation to sort the messy caps into a queue and enter the cap transport track through the reversing twist channel. When passing through the cap-wearing mechanism, the caps hanging from the bottles pass through the capping plate to ensure that the caps are properly worn.
(4) Capping head: After the oral liquid bottle puts on the cap and enters the capping head turntable, the three opened knives will rotate forward with the bottle as the center, and press the cap under the control of the cam. At this time, the three capping knives will Under the action of the taper sleeve, the rolling knife is rolled toward the cover at the same time. After rolling, it is separated from the cover at the same time and returns to its original position.
(5) Tracking the filling mechanism: The oral liquid filling machine uses a servo motor to drive the gears and racks, and then drives the filling needle to reciprocate. By adjusting the relative position of the spray needle frame and the mounting frame, the filling needle can be accurately inserted into the middle of the bottle mouth.

#unit-6pbs5dv16Da4UJw .ce-image_inner{justify-content:center;}#unit-6pbs5dv16Da4UJw .ce-image{height:100%;width:100%;--image-effect:3;object-fit:cover;}#unit-6pbs5dv16Da4UJw{padding-top:1vw;}

#module-9EmZfOLyUqu2c{padding-top:0vw;padding-bottom:0vw;}

Technology is constantly developing, China's industry is constantly improving, many factories are not satisfied with manual work, but into the process of mechanization. However, in recent years, many technology companies in China have been rising and relying on their own strength to produce a lot of automation equipment, which has also brought our country to the forefront of the world.
The emergence of automatic filling machine replaced the entire automatic filling machine sales market. Its full automation not only increases the speed of production, at the same time in the filling quality has been greatly improved, automatic filling machine is the pursuit of quality and speed, at the same time, it also greatly reduces our labor force, but also in the packaging also saves a lot of materials. Various advantages have brought great benefits to our factory.
The entire production process of automation equipment is very stable, Improve the consistency of the product, because it is suitable for mass production of products, so reduce the production cost of the enterprise, to reduce a lot of unnecessary expenses to the enterprise, the enterprise can also use the money to invest in larger projects. It is precisely because of the existence of automation equipment, so that we have a lot of trouble in the work, but also let the enterprise have more income, is a two-shot thing, but also let us feel the progress and development of society.

#unit-6pbs5dv16Da4UJw .ce-image_inner{justify-content:center;}#unit-6pbs5dv16Da4UJw .ce-image{height:100%;width:100%;--image-effect:3;object-fit:cover;}#unit-6pbs5dv16Da4UJw{padding-top:1vw;}