How to replace the heating tube of powder filling machine?

Powder filling machines are mainly used for quantitative packaging of powdery, powdery, powdery materials in the chemical industry, food, agricultural and sideline products and other manufacturing industries; such as: milk powder, starch, pharmaceuticals, veterinary drugs, premixes, additives, seasonings Materials, feeds, enzyme preparations, etc.; this system's automatic quantitative packaging machine is suitable for quantitative packaging of powders of various packaging materials such as bags, cans, bottles, etc.; this powder filling machine integrates machinery, electricity, light, and instrumentation. , single-chip microcomputer design and operation, with functions such as system automatic quantification, system automatic filling, and system automatic adjustment of measurement errors; relatively fast: using spiral blanking and light control technology; high precision: using stepper motors and electronic weighing technology

1. Turn off the powder filling machine, open the lower protective cover, and turn the stop plates on the upper ends of the heating block and refrigeration block springs toward A. Pass in direction A1, raise each component, and remove the guide belt.

2. Push the driven wheel in direction B and remove the old heating tube.

3. Install the new heating pipe and install the upper and lower guide belts.

4. The moving wheel, heating block, and refrigeration block rotate back to their original positions.

5. Connect the power supply to rotate the pulley and drive the test machine. If there is a phenomenon that the sealing bag is moving around, the adjustment screw on the passive wheel base can be used to adjust the following.

6. Install the protective cover and continue working after heating.